Industrial Prelube System
Pre-Oil It Or Lose It !
Industrial Pre Lube Kit Saves Engines


Have oil pressure on your Industrial engine oil system before startup and eliminate bearing wear and engine failure.

For all Industrial, Stationary, Generator, Automotive, Boat, Tractor, Truck, Diesel, Gasoline, Engines and Motors.

You've all heard a lot of numbers thrown around, but it's pretty common knowledge that at least 50% of all engine wear occurs at start-up.

This is due to the fact that the crankshaft drives the oil pump, which pressurizes the lubrication system.

Every time the engine is started, several hundred revolutions of the crankshaft can occur prior to the oil pump pressurizing your industrial engine oil system to lubricate the bearings.

The longer your engine sits without running the dryer the start-up is. After only a few days, all the oil in the galleys and bearings has drained back into the oil pan.

With the Industrial-Prelube System installed, filtered oil is stored in the accumulator tank ready to pressurize the lubrication system BEFORE the first revolution of the crankshaft.

This completely eliminates all of the wear due to dry bearing abrasion from engine start-up without oil pressure.
The accumulator tank is connected to the engine oil gallery with a hydraulic hose where the pressure-sending unit enters the block.

When the engine is running the solenoid valve on the Insta-Lube Kit remains open and the engine oil pump refills and pressurizes the accumulator tank. 

The Solenoid valve closes when the key is turned off, and the stored in the accumulator making it ready for your next startup. 



The Insta-Lube Industrial-Prelube Kit Works On All:

Allis Chalmers, Caterpillar, Chris Craft, Continental, Cummins, Detroit Diesel, Deutz, Gray Marine, Hercules, International Harvester, Iveco, John Deere, Mac, Massey Ferguson, Mercedes, Palmer Marine, Perkins and Waukesha Engines. 

Insta-Lube kit Inventory: Aluminum Storage Tank, Marine Grade Solenoid Valve, Schrader air Valve, Mounting Brackets, 6 of 3/8 in. Hydraulic Hose, Hose Fittings, Pipe Fittings, Wiring.

The Storage Tank Will Work In All Positions 

Engine Make-Year